I thought I had a septic problem when my toilet and sink wasn't draining properly. This suspicion was confirmed when sewer water started backing up in my bathtub. I figured that this was a job for a professional, so I called a local sewer service company. Sure enough, my septic tank was full and this was causing the problem. After having my tank pumped out, my drains run freely and my toilet flushes better than it has in a long time. My name is Wesley Hammond and the experience that I had with my septic system is the reason that I'm writing this blog. Since sewage backup in the house is very unhealthy, everyone should be aware of the signs of a faulty septic system. As you read these articles, you'll learn about the different types of septic system problems and how you can keep them from happening.
While a concrete foundation works well in most situations, there are some situations where you will need to do something more. For example, if you want to build your home in an area that has boggy or sandy soil, you may experience some settling when using a concrete foundation. This is where you need to reinforce your foundation with piles to make sure that it does not settle, crack, and compromise the integrity of your home.
Types of Piles
You have a couple of basic types of piles to choose from when reinforcing a foundation. For starters, you could use a drive pile. These tiles are driven into the ground and work best when you can rest the bottom of the pile on bedrock. If, on the other hand, the bedrock is too deep to make it feasible to drive piles down, then you should opt for screw piles. These piles will have helical fins, which means they have to be driven into the ground with a specially designed rotating head.
Advantages of Screw Piles
When using screw piles, you get a couple of main advantages over driven piles:
1. The machine used to drive screw piles into the ground is more compact than a pile driver, so you can use it in tight areas. You can also drive screw piles in areas that have a lot of established landscaping without causing excessive damage.
2. The helical fins on the pile help to distribute the weight of your building over a larger area. This means that if you are trying to create an anchor in a sandy or boggy area, screw piles will provide more support than traditional piles would.
You have a few different options for placing piles. If you are placing piles in advance of the foundation itself, then you can drive the piles into the ground directly under the foundation. If you need to shore up the foundation of an existing building and can access both the inside and the outside of the building, then you can drive a pile on the inside and outside of the foundation, then run a rod from pile to pile and through the foundation to provide support. Finally, if you can only access the outside of the building, you can drive two piles in a row extending perpendicularly away from the foundation and then run a bar from the foundation through both piles to provide cantilever support to the foundation.
The above article should indicate how necessary it is to have an engineer evaluate your situation and decide which type of piles to use and how to place them. If you know that you need extra support for your foundation, look for a company that has a lot of experience with driving piles to make sure that you can benefit from the wisdom they have obtained through years and years on the job. For instance, you could contact Alberta Screw Piles LTD.Share