I thought I had a septic problem when my toilet and sink wasn't draining properly. This suspicion was confirmed when sewer water started backing up in my bathtub. I figured that this was a job for a professional, so I called a local sewer service company. Sure enough, my septic tank was full and this was causing the problem. After having my tank pumped out, my drains run freely and my toilet flushes better than it has in a long time. My name is Wesley Hammond and the experience that I had with my septic system is the reason that I'm writing this blog. Since sewage backup in the house is very unhealthy, everyone should be aware of the signs of a faulty septic system. As you read these articles, you'll learn about the different types of septic system problems and how you can keep them from happening.
If you are planning a commercial development project, there is a lot of work that needs to be done before breaking ground. You want to plan the type of construction that you are going to do, such as wood or steel buildings, and if you are going to use a heavy design or other methods. There are a lot of lightweight construction methods that can reduce costs and save time for your project. The following lightweight construction guide will help you choose cost-effective solutions for your commercial project.
Planning Concrete to Support the Structure — The first thing that needs to be done with any building design is the concrete foundation. When you are building a lightweight structure, there are going to be areas where weight is concentrated in one point. These are the load-bearing points that need to have reinforced foundation footing beams to support the weight of the structure. Other concrete elements may be needed for the design, such as grouting and soil stabilization, to support the structure's load-bearing points.
Engineered Wood and Steel Skeleton Designs — For the skeleton of the lightweight structure, there are a couple of choices for the type of design that can be used. First, you may want to consider more traditional steel skeletons, which can be erected quickly. These skeletons can also be combined with modern engineered lumber products, such as laminated beams. These materials give you the advantage of using lighter materials that can span the same lengths as steel materials. The best way to integrate these materials into the design is to combine the steel skeleton with modern engineered lumber elements.
Building Out the Structure With Wood Framing — Once the basic skeleton of a structure has been completed, it needs to be built out and finished with other materials. The best way to do this is to use lightweight wood framing. The wood framing can be used for structural components like walls and floor systems. The roof system can also be built with wood framing, which can be modern engineered lumber systems using laminated beams and trusses.
Cost-Saving Roof Designs With Lightweight Materials — The roofing is another area where you will want to consider using lightweight materials for the design. Today, there are several roofing materials that can be used to install a lightweight roof on a commercial building. You may want to consider a layered system with an insulated foam board and layers of impermeable membrane materials for a cost-effective, lightweight roofing solution. There are also options for spray foam materials that can be used and finished with an impermeable sealant to complete the lightweight structure.
These are some of the options you will want to consider for your commercial project's design. Contact a commercial construction service to start planning lightweight designs to reduce the costs to develop your property.Share